Showing posts with label table. Show all posts
Showing posts with label table. Show all posts

Singer Cabinet No. 40 project - reveal

>> Monday, August 25, 2008

Today I finished the last step of refinishing the sewing cabinet. It felt slightly rough after the first coat of polyurethane dried, so I sanded it all over with 220 sandpaper and brushed on another coat. This is what it had suggested on the can.

And it worked really well. Sanding created a bit of a whitish dusty look (which I wiped clean with barely damp paper towel) but it felt much smoother and after the 2nd coat of polyurethane dried the surfaces felt very smooth and nicely finished. I've varnished things before and never bothered to do the "sand between coats" step but I admit now that it really does make all the difference.

So now the cabinet is done and I can show it off. It really doesn't seem like that much work when you look back, it was just sort of frustrating at the time doing the stripping but I think I have the hang of it now. But it's a reminder that I wouldn't really want to try anything more ornate, or too big to rinse in the sink!

As I mentioned luckily it was really only the top that was damaged so the rest is still the original finish and in nice shape. This is the back view:It's funny because in the craiglist picture it really looked worse than it was. Also, the sides were up in the photo and one panel seemed to be sagging. I thought the hinges might need replacing and even had a quick look on ebay and found some listed. But when we picked up the table and moved it, a metal rod swung out and it turns out there's a support for the larger side panel that tucks into the table when it's not in use. And the hinges are in great shape and look practically new.

This support swings right out - there's a felt pad on the top

I used a cream-with-tan-stripes upholstery cotton (a sample square from the Textile Museum sale) to re-upholster the bench. I chose the light colours because it just lightens up the whole set which is a bit dark. Also it matches my new/vintage Bernina sewing machine - but that's a topic for another post. Here's a glimpse of the inside of the bench:
This is the table with the sides out and the drawer open. I didn't refinish the inside of the two side panels so they're not perfect but the polish with mineral oil spruced them up quite well. I did refinish the little panel in front of the sewing machine, so you can see what a nice match the stain was to the original finish.
I'm so glad that the cabinet turn out so well. As I mentioned it would have been less trouble to wait for one in great condition to turn up, but then again it's very satisfying to take something that's been a bit neglected and bring it back to life. Also it was a bargain at $55.

And don't forget that includes the sewing machine inside. That's been brought back to life too, I'll show that next post. Thank you for the comments!

Read more...

Singer Cabinet No. 40 project

>> Sunday, August 24, 2008

My weekend project is this little sewing table that I picked up last weekend just before we went camping for a few days. It's one of those things that I didn't know existed until recently but turns out is a perfect design for our small living/dining/studio/crafts room. When I did some research I discovered it's the 1940s No. 40 Singer cabinet, designed for machines such as the lovely Singer 15-91 sewing machine which is what is tucked in there right now.

The great thing about the design is that the two leaves open and the sewing machine is lifted up and settled in the top. Then you have the two leaves as extra table space while you work. But when it's shut up it's quite small. The front panel is a funny drawer that is hinged at the bottom only and has small compartments inside.
It also has a matching bench that tucks underneath. The bench has a lid that lifts up with storage underneath for sewing accessories.

Also the style is similar to other furniture we've collected for the room, a 1940s side table, an Edwardian cabinet (to be shown later) and a Duncan Phyfe dining table. It's also mahogany which matches the cabinet. All craigslist finds! In this case it's going to be a labour of love because as you can see the finish is in very bad shape. It's mainly the top, the rest seems to be in quite good condition. The good news is that it's basically the varnish that has scraped off but underneath the wood is fine. So I've been working on refinishing that and I can show you my progress in the next couple of posts...

Read more...

My craft table

>> Friday, December 14, 2007

You can see one of the messenger bags in the corner of this picture

The craft sale at the Tranzac went pretty well. I had Bradley to keep me company and a few friends dropped by. So nice to see you!

I'm wondering about going back this weekend. I don't have a table reserved but the organizer said I could come by and there would either be a cancellation or she could find me a small table/corner. So if you missed me last week you could come this weekend.

My table was a bit dark so these aren't great pictures, but here are some of the bags:These are my new needle books. There are just three left. The covers are brown cordoruy or linen, with wool applique flowers and cream-coloured wool pages.
I found this glass tray recently and used it to display my jewellery:
I like the Tranzac Club. I used to live on Brunswick Avenue in a rented studio apartment on the third floor of one of the old Victorian houses. Now that I think of it, the bathroom floors on the second floor had nice old hexagonal floor tiles. And I used to go to the Tranzac a lot. They have lots of different events there, including my friend John Southworth who played last Saturday evening - a show I was sorry to miss. And they've had lots of crafts shows over the years, back when I was wondering if I would try it myself one day. So it feels quite cosy...and sort of nostalgic.

Read more...

  © Blogger template Simple n' Sweet by Ourblogtemplates.com 2009

Back to TOP